Project Overview
This body corporate project in St Kilda involved a full exterior repaint of a three-storey 1970s-style brick and render apartment block, including significant render repair work across the facade. The building sits above an open car park at ground level, and years of coastal weather had taken a serious toll on the exterior. The render panels on the balcony soffits and fascia bands were heavily weathered, faded to a tired creamy buff colour with visible cracking and paint breakdown throughout. The body corporate committee reached out to us looking for a team that could manage the render repairs, repaint the full exterior and keep disruption to residents at a minimum.
St Kilda is one of Melbourne’s most iconic bayside suburbs, and properties here deal constantly with salt air, wind and moisture. These conditions are particularly hard on rendered finishes, which are prone to cracking and moisture penetration if they are not maintained. When a building starts to show signs of wear it affects not just the appearance but the long-term structural integrity of the exterior walls. For body corporate properties where the exterior is a shared responsibility, staying on top of maintenance protects the investment for all unit owners.
Initial Assessment and Planning
Our team carried out a thorough inspection of the entire building exterior. We walked the site with the body corporate committee to identify all areas of concern. The render panels across the balcony fronts and fascia bands showed heavy weathering and paint failure. One area that stood out was a rendered column in the car park where layers of paint were peeling away to expose old grey render beneath, with active spalling and moisture damage visible. This kind of deterioration is common on buildings of this era where the original render coatings have reached the end of their serviceable life.
We put together a detailed scope of work and timeline that was shared with both the committee and residents. Communication is a big part of what we do on body corporate projects. Notices went out to all residents outlining when work would begin, what areas would be affected and how we planned to stage the project so access to the building, car park and common areas was maintained. We also provided sample boards and product specifications so the committee could make confident decisions on colours and finishes before we started. We find that this upfront investment in communication and planning pays off throughout the project — residents feel informed, the committee feels confident and the work proceeds without unnecessary delays or misunderstandings. We also provided sample boards and product specifications so the committee could make confident decisions on colours and finishes before we started.
Render Repair
The render repair work was substantial on this project. Across the facade, the balcony soffits, fascia bands and several structural columns all required attention. We cut out all damaged sections where the render was cracked, hollow or separating from the substrate. The car park columns with active spalling were given particular attention — we removed all compromised material back to solid substrate before rebuilding with a high-quality patching compound.
Each repair was applied in layers and allowed to cure between coats. This is the only way to achieve a structurally sound repair that will not crack or move over time. Rushing this stage leads to failures within months, which is why we invest the time to do it properly. During the repair process you could see patches at different stages of drying across the facade — some in fresh light grey, others cured and ready for priming. Every repaired section was sanded smooth and blended into the surrounding surface before any primer went on.
Surface Preparation
Beyond the render repairs, the full exterior required thorough preparation. We pressure washed all surfaces to remove built-up grime, salt deposits, loose paint and biological growth. In a bayside location like St Kilda the salt buildup is heavier than what you see further inland, so we took extra time to make sure every surface was properly clean.
We sanded back rough edges and uneven areas across the building to create a uniform surface. The open car park structure beneath the building presented its own challenges — the exposed soffits and concrete columns all needed to be cleaned, prepared and primed to the same standard as the facade above. Painting in a car park environment requires careful scheduling around vehicle movements and pedestrian access, which we managed by working in sections and maintaining clear access lanes throughout. Gaps around window frames, door frames and junctions were sealed with a flexible exterior sealant to prevent moisture ingress. The open car park structure with its exposed soffits and concrete elements required careful preparation too — every surface that would receive paint was cleaned, repaired and primed to the same standard as the facade above.
Priming and Painting
We applied a premium exterior primer to all rendered and previously painted surfaces. The primer improves adhesion, provides moisture protection and ensures a consistent colour across both repaired and original surfaces. When you have significant areas of new render patches sitting next to the existing finish, the primer is what prevents a patchy result — without it the repaired areas absorb paint differently and you end up with visible variation.
For the topcoats we used a high-quality exterior acrylic from Dulux, chosen for its durability, UV resistance and ability to handle the coastal conditions St Kilda properties face. Two full coats across all exterior surfaces using a combination of spray, roller and brush. The spray application on the larger flat surfaces gave us an even, consistent film build while the brush and roller handled the detailed areas around balcony fronts, fascia bands and the car park columns. Our painters took extra care around windows, balcony balustrades and architectural details to keep the lines clean throughout.
The colour scheme was selected by the committee with guidance from our team. We provided sample boards so they could see exactly how the colours would look on the building before committing. The fresh scheme brought the building from its tired, faded appearance to a clean, modern look that suited the St Kilda streetscape.
Managing the Project Around Residents
We staged the work in sections, completing one side of the building at a time so residents always had clear access to entry points, the car park and common areas. Safety barriers and signage went up wherever work was being carried out. The car park area required particular care — we needed to manage vehicle access and pedestrian safety while working on the columns and soffits overhead.
Our team maintained regular communication with the strata manager, providing weekly updates on progress. We also made ourselves available to answer questions from individual residents, which keeps everyone informed and comfortable with the process.
Access and Safety
For the upper levels we used scaffolding and appropriate access equipment to reach the third-storey facade safely. All scaffolding was erected by a licensed provider and inspected before use. Our team followed strict OHS protocols throughout — harnesses where required, proper signage and regular safety briefings. We submitted all relevant Safe Work Method Statements to the body corporate prior to starting. All work was completed in accordance with AS/NZS 2311.
We also ensured that all access equipment positioning did not interfere with the car park operations below. Residents needed to continue using their parking spaces, so we coordinated the scaffolding layout carefully to maintain access while giving our painters safe working platforms across the full facade. This kind of coordination is standard practice for us on body corporate projects and it is something committees consistently appreciate.
The Final Result
The finished result was a complete transformation. The building went from looking tired and weathered — with cracked render, peeling paint and exposed substrate — to fresh, clean and modern. The render repairs were invisible under the new paint, the car park columns that had been actively spalling looked solid and uniform, and the balcony fascia bands and soffits that had been the worst-affected areas were restored to a high standard. The committee was very pleased with the outcome and several residents commented on the difference.
This project is a great example of why regular exterior maintenance matters for body corporate properties. The building is now well protected against the elements and looking its best. The quality products and thorough preparation mean the finish will hold up for years, even in the demanding St Kilda coastal environment.
Why Choose Ace Team Painting for Body Corporate Projects
At Ace Team Painting, we have worked with body corporate committees and strata managers across Melbourne for over 20 years. We understand the unique challenges that come with painting multi-unit properties and we have the systems in place to manage these projects efficiently. We are fully licensed and insured with public liability up to $20,000,000 and our team is EBIX verified.
If your body corporate is considering an exterior repaint or render repair project, we would love to hear from you. Get in touch with our team today for a free, no-obligation quote.





