Commercial Warehouse Exterior Repaint, Render and Concrete Panel Repaint – Keysborough

Project Overview

This commercial project in Keysborough involved a full exterior repaint of a large industrial warehouse complex with multiple building sections. The exterior featured a mix of render and concrete panel cladding alongside metal sheeting, and it had seen better days. The walls were heavily stained, faded to a tired khaki and olive tone with visible grime streaks running down the concrete panels. The client wanted to refresh the look of the property, improve its street presence and make sure the exterior surfaces were properly protected going forward.

Keysborough is a busy industrial and commercial hub in Melbourne’s south-east, and businesses here understand the importance of maintaining their premises. A well-presented commercial property creates a positive first impression and helps protect the building’s structural integrity. Warehouse buildings are exposed to harsh conditions — direct sun, heavy rain, temperature fluctuations — and if the exterior is not looked after, deterioration accelerates quickly. For businesses that depend on their premises to support daily operations, the appearance of the building also plays a role in how the business is perceived by clients, suppliers and potential customers passing by. For businesses that rely on their premises to support daily operations, the appearance of the building plays a real role in how the business is perceived.

Site Inspection and Scope of Work

Our team walked the entire perimeter to assess the condition of all exterior surfaces. The concrete panels showed significant chalking and grime staining, with some panels in worse condition than others depending on their orientation and exposure. The rendered sections had hairline cracks and general weathering. We also identified areas where protruding panel joints needed specific attention, along with the roller doors and metal sheeting.

We provided the client with a detailed quote covering the full scope — products, timeline and a staged schedule that worked around their warehouse operations. For commercial projects we always plan around operating hours and delivery schedules. This one required close coordination with the warehouse management team, particularly around the loading dock and main entry areas that needed to remain accessible throughout.

The multiple building sections on this complex meant we were dealing with several different surface types — smooth render panels, protruding panel joints, roller doors and metal sheeting — each requiring a slightly different preparation and painting approach. We mapped out the entire building during the inspection so we could plan the right products and techniques for each surface type.

Surface Preparation — Concrete Panels

Concrete panel buildings are common in commercial areas like Keysborough and they need a specific approach. The grime streaking on this building was particularly heavy — years of water runoff had carried dirt and pollutants down the face of the panels, leaving visible stain lines. We pressure washed all panel surfaces at high pressure to remove the staining, loose paint, chalking and any biological growth. This step revealed the true condition of the substrate and showed us exactly where repairs were needed.

Once clean and dry, we inspected each panel closely and repaired cracks and damage with a suitable concrete patching compound. Efflorescence was treated and neutralised. We also checked and repaired failed sealant joints between panels, as these are common entry points for water on this type of building.

Surface Preparation — Rendered Sections

The rendered sections were washed at a lower pressure to avoid damage, then assessed for cracks and deterioration. Repairs were made using a quality exterior render patch, sanded smooth and blended into the surrounding surface. The rendered areas around the office entrance received particular attention as they are the first surfaces visitors see.

Priming

With all surfaces cleaned and repaired, we applied a premium exterior primer across the entire building. For the concrete panels we used a sealer primer designed for masonry and concrete, which locks in chalky residue and provides a solid base for the topcoat. For the rendered sections we used an acrylic primer suited to cementitious surfaces. We specified products for each substrate type because using the right product on the right surface is what delivers lasting performance. We made sure the primer fully cured before moving on to topcoats — that curing time is when the proper bond forms with the substrate.

Painting

For the topcoats we selected a high-performance exterior acrylic from Dulux, formulated for commercial and industrial applications. Two full coats across all surfaces using a combination of airless spray and roller for efficient coverage while maintaining a smooth, consistent finish.

The colour scheme was a standout on this project. The client chose a warm grey and taupe on the lower concrete panels transitioning to a darker charcoal and brown tone on the upper sections, finished with a bright lime and yellow-green accent stripe running along the roofline. The result was a modern, branded look that completely transformed the building from its previous tired khaki appearance. We worked closely with the client to make sure the colour transitions were clean and the accent stripe was precisely applied.

Working Around Business Operations

We coordinated with the warehouse team to schedule work around their busiest periods. Loading docks and main entry areas stayed accessible at all times — drop sheets were laid across the car park apron to protect the surface, but vehicle access was maintained. All equipment and materials were stored securely on site.

Safety was a top priority. We submitted Safe Work Method Statements before starting, conducted daily toolbox talks and ensured all team members wore appropriate PPE. Barriers and signage were set up around active work zones.

Access Solutions

Given the height of the building, we used a scissor lift to reach the full extent of the concrete panels safely. Two painters worked simultaneously from the elevated platform, which allowed us to maintain efficiency across the large surface areas. All equipment was operated by trained personnel and complied with current OHS regulations. We planned the access strategy to minimise repositions, saving time and keeping costs down. We coordinated the positioning of the access equipment with the warehouse team to make sure it did not interfere with vehicle access, loading operations or pedestrian routes at any point during the project.

The Final Result

The transformation was dramatic. The building went from a faded, grime-streaked warehouse to a clean, modern facility with a striking colour scheme. The warm grey lower panels, darker upper sections and that bold lime-green accent stripe along the roofline gave the property a strong visual identity that the client was very proud of. The concrete panels that had been chalky and stained were now smooth and uniform. The rendered sections were solid and sharp.

The client commented on how much the repaint had changed the perception of their business. A fresh exterior sends a clear message that the business pays attention to details and takes pride in its operations. The premium paint system is designed to withstand years of UV, rain and temperature fluctuations, so the client can focus on running their business knowing the building is well protected.

The multiple building sections on this complex meant we were dealing with several different surface types in a single project — smooth render panels, protruding panel joints, roller doors and metal sheeting. Each surface type requires a slightly different preparation and painting approach, and mapping all of this out during the planning stage is what allows us to work efficiently and deliver a consistent result across the whole building.

Two painters worked simultaneously from the scissor lift on the upper sections, which allowed us to cover the large surface areas efficiently while maintaining the quality of finish the client expected. Drop sheets were laid across the car park apron to protect the surface from any paint drips or overspray, and all equipment was positioned to maintain vehicle access throughout.

The colour scheme really brought this building to life. The warm grey and taupe on the lower panels, the darker charcoal and brown on the upper sections and that bold lime and yellow-green accent stripe along the roofline gave the property a modern, branded identity that completely changed how the business presented itself from the street. Getting the colour transitions clean and the accent stripe precisely applied required careful masking and cutting in, but the result was well worth the effort.

Why Choose Ace Team Painting for Commercial Projects

At Ace Team Painting, we have the equipment, the know-how and over 20 years of experience handling commercial painting projects of all sizes across Melbourne. We work around your schedule, follow strict safety protocols and use premium products for a lasting finish. Fully licensed, insured and EBIX verified.

If your commercial property is due for a repaint, get in touch for a free quote.

Whether it is a warehouse, factory, office building or retail space, we deliver results that protect your property and improve its presentation. Our team is experienced in managing the logistics of large commercial projects — from access planning and safety compliance through to working around your operations without disruption.

Get your free quote today

At Ace Team Painting, we take pride in delivering top-quality painting services with precision and care.

sss
Scroll to Top