Full Exterior Repaint – Mount Waverley

Project Overview

This Mount Waverley project was one of the more comprehensive exterior repaints we have taken on. The property was a large two-storey home featuring a mix of weatherboard cladding and face brick base, plus a front verandah with timber posts, decorative fretwork valance and sandstone and slate entry steps. The scope covered everything — weatherboard replacement where boards had rotted, brick repaint, all timber windows, gutters, fascia boards, porch columns, fretwork, and timber paling fences and gates. The homeowner wanted a complete refresh that would restore the home and protect it for years to come.

Mount Waverley is a popular residential suburb in Melbourne’s east, known for its leafy streets and mix of established homes and newer builds. Many older properties feature weatherboard and brick construction with traditional architectural details. While these homes have great character, they require regular maintenance. Melbourne’s weather does not go easy on exterior surfaces and if maintenance falls behind, small problems turn into bigger ones quickly. A comprehensive exterior repaint that addresses every element — weatherboards, brick, windows, gutters, fascia and timber details — is the most effective way to restore and protect a home like this in a single project.

Initial Assessment

Our team inspected every part of the exterior. The weatherboards were in a faded warm beige and cream — not in terrible condition but clearly tired and in need of a refresh. Several boards on the south-facing side had developed rot that had compromised them beyond simple repair. The brickwork was structurally sound but the existing paint was dated. The timber window frames, porch columns and decorative fretwork valance all showed weathering. The property also has a pool area with a glass balustrade that would require careful masking.

We discussed everything with the homeowner and put together a detailed plan covering the replacement of damaged boards, full preparation of all surfaces and a colour scheme that would freshen the home while respecting its traditional character. The homeowner was impressed with the thoroughness of our inspection and felt confident that every issue would be addressed.

Pressure Washing

We started with a thorough pressure wash of the entire exterior — we had the petrol pressure washer set up on the back lawn and worked across both front and rear elevations. Steam was visible on impact as we stripped away years of grime, mould spotting and weathering from the weatherboard surfaces. The pressure washing stage is essential for removing contaminants and revealing the true condition of the timber underneath. It also showed up areas of tannin bleed staining along some boards that would need specific treatment during preparation.

Weatherboard Replacement and Preparation

The rotted boards were carefully removed, framework checked and new weatherboards sourced to match the existing profile exactly. Every new board was primed on all sides before installation, including the back face — this prevents moisture entering from behind, which is one of the main reasons boards fail early in Melbourne’s climate.

For the existing boards we scraped back all loose and flaking paint, sanded the surfaces and filled every nail hole, gap and imperfection. We treated any soft spots or early-stage rot with timber hardener to stabilise the wood. Areas with tannin bleed staining received a stain-blocking primer to prevent the marks showing through the topcoats. All weatherboard surfaces were then primed and received two coats of a premium Dulux exterior acrylic — excellent adhesion to timber, UV resistant and built to perform.

Brick Repaint

The face brick base required a different approach. We cleaned the bricks thoroughly, applied a masonry primer that penetrates into the porous surface and then applied two coats of exterior masonry paint, working the roller and brush into the textured surface to cover every face and mortar joint. The colour was chosen to complement the weatherboards and give the whole house a cohesive, updated look.

Timber Windows, Verandah and Details

The timber windows were sanded, filled and primed before receiving two coats of quality enamel for a hard-wearing, durable finish. Careful cutting in around the glass for clean lines on every window.

The front verandah was a feature of this home — the timber posts, decorative fretwork valance and sandstone and slate entry steps all needed attention. The fretwork required particularly careful preparation and painting due to its intricate profile, but the result really enhanced the character of the entrance. The pool area required careful masking around the glass balustrade and surrounds.

Gutters and Fascia

Gutters were cleaned, sanded and any surface rust treated with a rust converter before being primed and painted. Fascia boards received the same treatment. These elements tie the whole exterior together — freshly painted gutters and fascia framing the roofline make a noticeable difference to the overall appearance.

The Final Result

The home went from looking tired and faded to fresh, vibrant and full of character. The new weatherboards blended seamlessly with the originals, the brickwork had a clean, modern finish, the windows were sharp and the verandah with its refreshed fretwork valance looked beautiful. The homeowner was thrilled and said it felt like coming home to a different house. The colour scheme tied all the different materials together, creating a cohesive result that enhanced the home’s architectural features.

The homeowner also commented on how smoothly the project was managed and how we kept the site clean throughout. Multiple surface types on a single property require careful coordination, and this project was a great example of what a comprehensive exterior repaint can achieve.

The front verandah was a real feature of this home. The timber posts, decorative fretwork valance and sandstone and slate entry steps all needed individual attention. The fretwork required particularly careful preparation and painting due to its intricate profile — paint needed to be worked into every cut-out and edge without drips or buildup. The result really enhanced the entrance and highlighted the character of the home.

The pool area with its glass balustrade required careful masking around the glass panels and pool surrounds to protect them from any paint contact. We set up barriers around the pool area during the painting stage and used drop sheets to protect the paving and surrounds.

A project with this many different elements — weatherboards, brick, windows, gutters, fascia, fretwork, fences and gates — requires careful coordination to ensure each substrate gets the right preparation and products. We mapped out the sequence of work so each stage could be completed properly without interfering with the others. The homeowner was kept informed at each point and the site was left clean and tidy at the end of every day.

Painting weatherboards well takes a specific technique. You need to work with the grain of the timber, maintain a wet edge to avoid lap marks and apply paint at the right thickness — too thin and you do not get enough protection, too thick and you get runs. Our painters know how to get this balance right and the consistency of the finish on this property showed it.

The brick repaint on the lower section of the home was an important part of achieving a cohesive result. The masonry primer we used penetrates into the porous brick surface and seals it, which reduces how much topcoat the brick absorbs and gives you a more even colour across the textured surface. Without this step, brick can soak up paint unevenly and you end up needing extra coats to get a consistent finish. We applied two coats of exterior masonry paint using roller and brush, working into every face and mortar joint.

The colour chosen for the brick complemented the weatherboard body colour and the white trim, giving the whole house a unified appearance. On a property with this many different materials — weatherboard, brick, timber, metal — getting the colour palette right is what makes the difference between a result that looks considered and one that looks disjointed. We provided sample boards so the homeowner could see the full scheme before we committed.

Why Choose Ace Team Painting

We have the skills and over 20 years of experience to handle even the most complex exterior repaints. Whether your home needs a simple refresh or a full restoration, we bring the same level of care and preparation to every job. Fully licensed and insured. Get in touch for a free quote.

Whether your home needs a simple weatherboard refresh or a full multi-surface restoration like this Mount Waverley project, we bring the same level of care to every job. We have been painting homes across Melbourne’s eastern suburbs for over 20 years and we understand the specific requirements of each surface type. Premium products from trusted brands, thorough preparation and a genuine commitment to quality on every project.

Get your free quote today

At Ace Team Painting, we take pride in delivering top-quality painting services with precision and care.

sss
Scroll to Top